다운로드 Capacity Info: Find out battery wear - v5.1.0.1

Capacity Info: Find out battery wear - v5.1.0.1 또는 Hotspot Shield Free VPN Proxy & Secure VPN, DroidCam - Webcam for PC, ESC POS Bluetooth Print Service Premium APK MOD APK, Aim Tool for 8 Ball Pool, Togel Generator Nomor Jitu 2021, VPNhub Best Free Unlimited VPN - Secure WiFi Proxy, 도구 카테고리에서 가장 멋진 애플리케이션 중 하나에 대해 들어 보셨습니다.

물론 모든 게임이나 애플리케이션이 모든 휴대 전화와 호환되는 것은 아닙니다. 게임이나 애플리케이션이 기기에서 사용할 수없는 경우도 있으며 시스템 버전에 따라 다릅니다. Android 운영 체제, 화면 해상도 또는 국가 Google Play에서 액세스를 허용합니다. APKPanda는 다운로드 할 수있는 Android APK 파일을 제공하며 이러한 제한을 고수하지 않습니다.>
Capacity Info: Find out battery wear - v5.1.0.1 최신 버전은 5.1.0.1, 출시일은 2021-08-22이며 크기는 2.4 MB입니다.Ph03niX-X에서 개발 한 Capacity Info: Find out battery wear - v5.1.0.1는 Android 버전이 Android 8.0+ 이상이어야합니다. 따라서 필요한 경우 휴대 전화를 업데이트해야합니다.

약 1000 회 다운로드했습니다. 원하는 경우 Android 기기에 개별적으로 다운로드하거나 설치된 앱을 업데이트 할 수 있습니다. 앱을 업데이트하면 최신 기능에 대한 액세스 권한이 부여되고 애플리케이션 보안 및 안정성이 향상됩니다.

The application will help you find out how much capacity is left in your battery

Instruction:

1.In order for the application to show the remaining capacity, put the device on charge, while the service must be turned on.
2.For a more accurate display of the remaining capacity, charge the device fully until "Status: Charged" is displayed.
3.If charging occurs after reaching 100%, then this is normal. Modern devices continue to charge for some time after reaching 100%.
4.If the design capacity is incorrect, change it in the application settings.
5.If the current capacity and/or charge/discharge current and/or voltage is not displayed correctly, then change the unit in the application settings.

ATTENTION! Do not kill the service. If the shell of your device likes to "kill" applications, or completely "kills" applications when cleaning the most recently launched applications or when removing an application from the most recently launched applications, or you use power saving, add this application to all possible exceptions. If your firmware has an application startup setting, be sure to ensure that this application can start after loading the OS, if you want the application to start automatically after loading the OS

FAQ:

Question: How does the app work?
Answer: Residual capacity is formed on the basis of the current capacity upon reaching 100% and the status of "Charged". During charging, an "attempt" is made to find out the residual capacity by the following formula: current capacity / (battery level / 100). If the charge level = 1% or 0%, or when it reaches 100%, charging continues, then instead of calculating, the current capacity is displayed in the remaining capacity. The current capacity is taken from the kernel of the OS, by the Android API itself, which allows you to get the current capacity without root rights. The kernel takes the current capacity from the battery itself and writes it to the "charge_counter" file (file path: /sys/class/power_supply/battery). On how accurate the current capacity depends on the battery and the core itself.

Question: What is considered to be "Capacity Added"?
Answer: "Capacity Added" is considered very simple: the current capacity - capacity, which was before you connected the charging.

Question: I have everything (or almost everything) in zeros. Why?
Answer: Because the manufacturer of your device has saved on various sensors. And since the kernel cannot get the value, it returns 0.

Question: Very large or small numbers are shown in the current capacity, charge/discharge current, voltage.
Answer: Go to the settings, in the "Misc" section, expand all the settings and change the unit of measurement.

Question: The current capacity has ceased to be displayed, although it was previously displayed (or is displayed, but not always).
Answer: This means that the battery is coming or has already come to an end. If everything is in order with the battery, then the firmware kernel or the controller, which gives the current capacity, may be buggy.

Question: The device is not supported. Add device support.
Answer: Alas, this is impossible, since it depends primarily on the battery and secondarily on the OS kernel. Therefore, setting 1 and writing about what is not supported, as well as asking to add support for a device, is pointless. You can bet 1, but think about it three times: is it worth spoiling the average rating for the application due to the fact that your battery or core does not give up the current capacity?

Supported Languages:

• English
• Română
• Беларуская
• Русский
• Українська

If you want to help with the translation and you do not have a GitHub account, then follow this link: https://drive.google.com/drive/folders/1DoBUA5wye-vGw8Me6b-7Y44iXfpBSu91

All suggestions for improving the application should be written to E-Mail: [email protected] or to Telegram: @Ph03niX_X

Added ability to reset screen time at any charge level