다운로드 MQTT Alarm Control Panel - v0.8.7 Build 4

MQTT Alarm Control Panel - v0.8.7 Build 4 또는 i-Neighbour, JMARemotesPro v1.9.1 APK Paid MOD APK, Blue Light, Sense Home Energy Monitor, SUPLA, O2 Smart Box, 부동산/홈 인테리어 카테고리에서 가장 멋진 애플리케이션 중 하나에 대해 들어 보셨습니다.

물론 모든 게임이나 애플리케이션이 모든 휴대 전화와 호환되는 것은 아닙니다. 게임이나 애플리케이션이 기기에서 사용할 수없는 경우도 있으며 시스템 버전에 따라 다릅니다. Android 운영 체제, 화면 해상도 또는 국가 Google Play에서 액세스를 허용합니다. APKPanda는 다운로드 할 수있는 Android APK 파일을 제공하며 이러한 제한을 고수하지 않습니다.>
MQTT Alarm Control Panel - v0.8.7 Build 4 최신 버전은 0.8.7 Build 4, 출시일은 2019-11-14이며 크기는 7.7 MB입니다.ThanksMister LLC에서 개발 한 MQTT Alarm Control Panel - v0.8.7 Build 4는 Android 버전이 Android 4.4+ 이상이어야합니다. 따라서 필요한 경우 휴대 전화를 업데이트해야합니다.

약 1000 회 다운로드했습니다. 원하는 경우 Android 기기에 개별적으로 다운로드하거나 설치된 앱을 업데이트 할 수 있습니다. 앱을 업데이트하면 최신 기능에 대한 액세스 권한이 부여되고 애플리케이션 보안 및 안정성이 향상됩니다.

MQTT Alarm Control PanelReuse and old Android devices as a home alarm control panel that integrates with Home Assistant or any home automation platform that supports MQTT messaging. MQTT Alarm Control Panel is an alarm control panel for use with home automation platforms that support MQTT messaging. The application was originally built for Home Assistant'sMQTT Manual Control Panel. However, the application can be used with any home automation platform that supports the MQTT messaging protocol such as Jeedom, openHab, or Node-Red.The alarm control panel acts as an interface for your home alarm system and allows for two way communication using MQTT. You can set the alarm state to away or home, or disarm the alarm using a code. Your home automation system controls the sensors or automation that triggers the siren or notifies users of possible intrusion. Features* Stream video, detect motion, detect faces, and read QR Codes.* Capture and emailing images when the alarm is disabled.MQTT commands to remotely control the application (speak text, play audio, display notifications, alerts).* Device sensor data reporting over MQTT (temperature, light, pressure, battery, etc.).* Day/Night mode themes based on MQTT sun value.* Fingerprint unlock support to disable the alarm. (on supported devices).* Optional screensaver mode using a digital clock or Imgur images.* Three day MQTT Weather forecast.* Home Automation Platform webpage support for viewing home automation dashboards.The alarm panel is designed to be used as a dedicated device which runs continuously in full-screen mode. The alarm panel is open source and available on GitHub. There is also a version that runs on a Raspberry Pi using Android ThingsFor the complete setup instructions and additional information, please visit the Project Home Page. Home AssistantHome Assistant's MQTT Manual Alarm Control PanelProject's Home PageRaspberry Pi VersionSupport: [email protected]

Improved MQTT reconnect on WiFi disconnect.