다운로드 Enigma Semi-Full EASY - v4.4.01

Enigma Semi-Full EASY - v4.4.01 또는 Car Launcher Pro APK Paid MOD APK, EOBD Facile v3.37.0802 APK + MOD (완전 잠금 해제) MOD APK, BimmerCode for BMW and Mini Premium APK MOD APK, Car-Check - UK Car Check, RealDash APK 잠금 해제 MOD APK, VNET GPS, 자동차 카테고리에서 가장 멋진 애플리케이션 중 하나에 대해 들어 보셨습니다.

물론 모든 게임이나 애플리케이션이 모든 휴대 전화와 호환되는 것은 아닙니다. 게임이나 애플리케이션이 기기에서 사용할 수없는 경우도 있으며 시스템 버전에 따라 다릅니다. Android 운영 체제, 화면 해상도 또는 국가 Google Play에서 액세스를 허용합니다. APKPanda는 다운로드 할 수있는 Android APK 파일을 제공하며 이러한 제한을 고수하지 않습니다.>
Enigma Semi-Full EASY - v4.4.01 최신 버전은 4.4.01, 출시일은 2019-09-04이며 크기는 2.2 MB입니다.DILTS-JAPAN에서 개발 한 Enigma Semi-Full EASY - v4.4.01는 Android 버전이 Android 4.0+ 이상이어야합니다. 따라서 필요한 경우 휴대 전화를 업데이트해야합니다.

약 1000 회 다운로드했습니다. 원하는 경우 Android 기기에 개별적으로 다운로드하거나 설치된 앱을 업데이트 할 수 있습니다. 앱을 업데이트하면 최신 기능에 대한 액세스 권한이 부여되고 애플리케이션 보안 및 안정성이 향상됩니다.

Enigma Semi-Full EASY mode exclusive operation application.This application is for Enigma Semi-Full only. It can not be used for the conventional ENIGMA & FirePlus series.This application is only for EASY mode which can adjust the ignition time. There is a dedicated application in PRO mode that can set the ignition time.This application can be downloaded for free. When it is free, you can connect with all Enigma Semi-Full, but only the tachometer screen is displayed. (Only tachometer and TPS are displayed).In order to set various functions of Enigma Semi-Full, you need to purchase the model data corresponding to Enigma Semi-Full you have from the model selection screen.When purchasing and selecting model data, the following functions can be used.- Preset data combined are prepared. Preset data can be easily written to Enigma Semi-Full.- + 20 / - 20 degree spark advance / delay angle can be adjusted for each engine rotation / throttle position. It is also possible to adjust the dwell time.- The fuel injection amount can be set for each engine rotation / throttle position.- Fuel correction at idling can be performed.- Adjustment of fuel injection time by engine temperature and intake air temperature is possible.- It is possible to set injection timing at each rotation speed.- Various maps can be displayed in 3D graph.- Two maps can be put inside Enigma Semi-Full, and it can be switched with an external switch.- In real time, you can display tachometer, throttle opening monitor, injector opening / closing rate, oil / water · engine temperature (depending on model).- Display the current engine speed and throttle position in real time in the fuel map.- Revolution Limit can be set .- Pit-in limit can be set (Applicable model only)- Digital acceleration pump can be set.- It is possible to correct the TPS sensor according to the actual machine.- You can make several fuel data and save it, you can change it immediately when you need it.- It corresponds to Japanese and English.Note You can not connect to some terminals manufactured by Fujitsu or not made in Japan's due to problems on the terminal side. Please note that you purchase. (You can check whether you can connect with your Android terminal before purchasing model data.)Pairing setup is required before connecting. When pairing and when connecting for the first time after pairing, keep the distance to Enigma Semi-Full as close as possible to within 30 cm.There is no direct linkage function of data with other Androrid terminal, PC version or iOS version. Migrate the data via Enigma Semi-Full.Refunds on model add-ins purchased in in-app billing are not accepted basically.Please be careful that there are no mistakes in model.This application contains deliverables distributed under license of Apache License, Version 2.0.

4.4.01-CYGNUS-X SE44J-Correct Idle Area map type4.4.00-Fixed problem can select MAP2 at preset map write.4.3.00-First release-JOGZR SA39J