다운로드 FTP Server - Multiple FTP users - v0.12.3

FTP Server - Multiple FTP users - v0.12.3 또는 ESC POS Bluetooth Print Service Premium APK MOD APK, Aim Tool for 8 Ball Pool, KUTO VPN - A free, fast, secure VPN, HA Tunnel Pro Free Custom Unlimited VPN, Togel Generator Nomor Jitu 2021, Turbo VPN v3.7.4 APK + MOD (Real VIP/Premium) MOD APK, 도구 카테고리에서 가장 멋진 애플리케이션 중 하나에 대해 들어 보셨습니다.

물론 모든 게임이나 애플리케이션이 모든 휴대 전화와 호환되는 것은 아닙니다. 게임이나 애플리케이션이 기기에서 사용할 수없는 경우도 있으며 시스템 버전에 따라 다릅니다. Android 운영 체제, 화면 해상도 또는 국가 Google Play에서 액세스를 허용합니다. APKPanda는 다운로드 할 수있는 Android APK 파일을 제공하며 이러한 제한을 고수하지 않습니다.>
FTP Server - Multiple FTP users - v0.12.3 최신 버전은 0.12.3, 출시일은 2020-08-19이며 크기는 5.7 MB입니다.Banana Studio에서 개발 한 FTP Server - Multiple FTP users - v0.12.3는 Android 버전이 Android 4.1+ 이상이어야합니다. 따라서 필요한 경우 휴대 전화를 업데이트해야합니다.

약 1000 회 다운로드했습니다. 원하는 경우 Android 기기에 개별적으로 다운로드하거나 설치된 앱을 업데이트 할 수 있습니다. 앱을 업데이트하면 최신 기능에 대한 액세스 권한이 부여되고 애플리케이션 보안 및 안정성이 향상됩니다.

A powerful application allows you to run FTP Server on your phone and help your friend or you to access/share files over the Internet.
It also helps you not to use USB port of device to increase the lifetime of it. It is also called Wifi file transfer or wireless file management.

All features are totally free
You can remove ads by opening the section Remove Ads in About screen.

APPLICATION FEATURES
√ Use any network interfaces in your device including: Wi-Fi, Ethernet, Tethering...
√ Multiple FTP users (anonymous user included)
• Allow each user to show hidden files or not
√ Multiple access paths for each user: Any folders in your internal storage or external sdcard
• Can set read-only or full write access on each path
√ Passive and active modes: Support simultaneous file transfer
√ Automatically open port on your router: Access files from everywhere on Earth
For the list of tested routers, please check the Help section in application
√ Automatically start FTP Server when certain WiFi is connected
√ Automatically start FTP Server on boot
√ Has public intents to support scripting/tasker
For Tasker integration:
Add new Task Action (choose System -> Send Intent) with the following information:
• Package: net.xnano.android.ftpserver
• Class: net.xnano.android.ftpserver.receivers.CustomBroadcastReceiver
• Actions: either one of following actions:
- net.xnano.android.ftpserver.START_SERVER
- net.xnano.android.ftpserver.STOP_SERVER

APPLICATION SCREENS
√ Home: Control the server configurations such as
• Start/stop server
• Monitor the connected clients
• Enable the feature to open ports in router automatically
• Change port
• Change passive port
• Set idle timeout
• Enable automatically start on specific WiFi detected
• Enable automatically start on boot
• ...
√ User management
• Manage users and access paths for each user
• Enable or disable user
• Delete user by swiping left/right on that user.
√ About
• Information about FTP Server

What FTP Clients are supported?
√ You can use any FTP clients on Windows, Mac OS, Linux or even browser to access this FTP Server.
Tested clients:
• FileZilla
• Windows Explorer: If user is not anonymous, please enter the address in format ftp://username@ip:port/ into Windows Explorer (username you created in User Management screen)
• Finder (MAC OS)
• File manager on Linux OS
• Total Commander (Android)
• ES File Explorer (Android)
• Astro File Manager (Android)
• Web browsers such as Chrome, Filefox, Edge... can be used in read-only mode

PASSIVE PORTS
The range of passive port is from the initial port (default 50000) to the next 128 ports if UPnP enabled, or next 256 ports if UPnP disabled. In general:
- 50000 - 50128 if UPnP enabled
- 50000 - 50256 if UPnP disabled

NOTICES
- Doze mode: Application may not work as expected if doze mode is activated. Please go to Settings -> Search for Doze mode and add this application to the white list.

PERMISSIONS NEEDED
√ WRITE_EXTERNAL_STORAGE: Mandatory permission for FTP Server to access files in your device.
√ INTERNET, ACCESS_NETWORK_STATE, ACCESS_WIFI_STATE: Mandatory permissions to allow user to connect to FTP Server.
√ Location (Coarse location): Only required for user who wants to automatically start server on Wi-Fi detect on Android P and above.
Please read Android P restriction about getting Wifi's connection info here: https://developer.android.com/about/versions/pie/android-9.0-changes-all#restricted_access_to_wi-fi_location_and_connection_information

SUPPORT
If you're facing any problems, want new features or have feedback to improve this application, don't hesitate to send it to us via the support email: [email protected].
NEGATIVE COMMENTS can't help the developer to solve the problems!

Privacy Policy
https://xnano.net/privacy/ftpserver_privacy_policy.html

0.12.3• Bug fixes: The uploaded file is not updated to Android media storage (Gallery)