다운로드 Resistor Scanner (beta) - v1.0.8

Resistor Scanner (beta) - v1.0.8 또는 KUTO VPN - A free, fast, secure VPN, Turbo VPN v3.7.4 APK + MOD (Real VIP/Premium) MOD APK, Hotspot Shield Free VPN Proxy & Secure VPN, ESC POS Bluetooth Print Service Premium APK MOD APK, SWAP - No ROOT, VPNhub Best Free Unlimited VPN - Secure WiFi Proxy, 도구 카테고리에서 가장 멋진 애플리케이션 중 하나에 대해 들어 보셨습니다.

물론 모든 게임이나 애플리케이션이 모든 휴대 전화와 호환되는 것은 아닙니다. 게임이나 애플리케이션이 기기에서 사용할 수없는 경우도 있으며 시스템 버전에 따라 다릅니다. Android 운영 체제, 화면 해상도 또는 국가 Google Play에서 액세스를 허용합니다. APKPanda는 다운로드 할 수있는 Android APK 파일을 제공하며 이러한 제한을 고수하지 않습니다.>
Resistor Scanner (beta) - v1.0.8 최신 버전은 1.0.8, 출시일은 2020-09-14이며 크기는 5.9 MB입니다.Иoldy Labs에서 개발 한 Resistor Scanner (beta) - v1.0.8는 Android 버전이 Android 5.0+ 이상이어야합니다. 따라서 필요한 경우 휴대 전화를 업데이트해야합니다.

약 1000 회 다운로드했습니다. 원하는 경우 Android 기기에 개별적으로 다운로드하거나 설치된 앱을 업데이트 할 수 있습니다. 앱을 업데이트하면 최신 기능에 대한 액세스 권한이 부여되고 애플리케이션 보안 및 안정성이 향상됩니다.

Resistor Calculator Section

Two-way conversion
Calculate resistor values by selecting its band colours on the grid. You can also get the colour bands of the desired resistor value by typing its value in ohms in the top-right corner.

Support 4 bands and 5 bands.
Tap on the resistor to switch between 4 and 5 bands.


Scanning Section

Resistor Types supported
Only 4-bands resistors with a clear background colour are supported.

Resistor Placement
· Make sure only 1 resistor is inside the square.
· Place the resistor HORIZONTALLY inside the blue square with the tolerance on the
RIGHT on a white background (a sheet of paper will do the job).
· Use the zoom bar to make the resistor as big as possible.
· The bigger the resistor is, the better the app will be able to determine the colour bands.

Auto-focus
The camera in the app is set to auto-adjust focus by itself. If the focus is bad, simply move the camera a bit farther away from the resistor and use the zoom bar to enlarge the resistor in the square.

Light Conditions
The camera won't do any better than our eyes to identify colours. Therefore light intensity and coloration are really important for colour detection. If the camera flashlight is not being used make sure that:
· Light is white (any other colour won't work)
· There is enough light for the camera to "see" well the resistor
· There are no shadows

Accuracy of the app
Accuracy of the app could vary a great deal depending on:
· Camera resolution
· Lightning conditions
· Background colour (Should be white only)
· Positioning
· Focus
· White balance

I take care of most of those variables. However, positioning, lighting conditions, and resolution will totally depend on the user.

Use "Live" mode and the flash light "ON" for better results.
Always try to follow these tips as thoroughly as possible for the best results.
The app can identify well most of the colours. However, for colours such as WHITE or GRAY the app doesn't do so well. This is something I'm aware of and I plan to improve it in later updates (and hopefully remove the "beta" from the name).

Email me at [email protected] for any suggestions, Hope you like it!














icons from: https://www.flaticon.com/

Bug fixes and UI changes